UNI-T UTG900E Series User Manual

LINI-T,.
3. Language
Set the device language to English or simplified Chinese.
4. Beep
Set the key pressing sound to "On" or "Off".
5. Num Format
Set the separator between numbers, press |NumFormat |to select Commal, Space |or (None |.
6. Backlight
Adjust the brightness of screen, press | Backlight| to select between | 10%), | 30%, (50%, (70%,
[go%land [100%].
7. Screen Lock
Press ScreenLock and select Off, 1 min, 5 min, 15 min, 30 min or 1h. The instrument will be
turned to screen lock state, the Mode button will blink, press any button to restore.
8. Preset
Reset to the factory setting
9. Help
The built-in help system provides contextual help for any of the buttons or menu soft keys on the
front panel. You can also use help list to get some help information about front panel operations.
Long press any soft key or button to open the help list, such as |Wave|, press any key or knob to
exit help list.
10. About
Press to check the device model, version and the official website of the company.
11. Upgrade
Firmware upgrade allowable after connected with PC, the specific steps are as follows:
a.Connect the PC by USB
b.Long press the | Utility to turn the signal source power on then release the button.
c.Program the firmware to the signal source by provided programming tool and restart.
13

UNI-T UTG900E Series Specifications

General

Brand	UNI-T
Model	UTG900E Series
Category	Portable Generator
Language	English