43
Table of Contents
1. Safety Instructions ------------------------------------------- 4
2. Structure 5 --------------------------------------------------------
3. Display 6 ----------------------------------------------------------
4. Power On/Off 6 --------------------------------------------------
5. Menu Introduction 7 --------------------------------------------
6. Operating Instructions 8 ---------------------------------------
7. USB Communication 17 ---------------------------------------
8. Specifications 17 ------------------------------------------------
9. Maintenance 18
10. Appendix ----------------------------------------------------- 19
-------------------------------------------------
1.Safety Instructions
To ensure accurate measurement results, please read the instructions carefully.
Please use this product in accordance with the user manual, otherwise the free
warranty will be voided if the product is damaged.
Please do not use this product in flammable, explosive, steamy, wet or corrosive
environments.
Please stop using the product if it is damaged or modified to avoid inaccurate
measurement results.
Please use the correct emissivity to obtain accurate temperature readouts.
To ensure the accuracy of the product, please warm it up for 10 minutes before
measuring if it has not been used for a long time.
When being charged, the internal temperature of the product will rise, which
will lead to inaccurate temperature measurement. So, it is not recommended
to take measurements during or right after charging the product.
The inherent temperature drift of the sensor will occasionally cause inaccurate
measurement. In this case, press the down button under the temperature
measurement interface to bring out “Calibrating” and automatically calibrate the
temperature.
UTi165A User Manual UTi165A User Manual
To Next Page
Loading...
Need help?
General