ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
CLEAN
LED
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT FAN
SWING
TEMP
Used to confirm the selected
functions
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Set timer to turn unit on or off
NOTE: HEAT mode is not supported
by the cooling only appliance.
Used to start/stop the Self
Clean function.
Turns indoor unit’s LED display
and air conditioner buzzer on and
off(model dependent), which
create a comfortable and quiet
environment.
FAN SPEED
TEMP
Enables unit to reach preset
temperature in shortest possible
time.
Selects fan speeds in the
following order:
NOTE: Holding this button
down for 2 seconds will
Saves energy during sleeping
hours.
Model:
RG10B1(E)/BGEF
Increases temperate in
1°C increments.
30°C.Max. temperature is
in 1°C increments.
Min. temperature is 17 .°C
feature.
Fresh
Scrolls through operation
functions as follows:
Follow Me( ) AP mode
( )
Follow Me( )...
The selected symbol will
flash on the display area,
press OKbutton to confirm.
SET
4
Turbo
FRESH
Used to start/stop the Fresh
SLEEP
Decreases temperature
activate Silence feature.
AUTO LOW MED HIGH
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
section of this manual.
Buttons and Functions
To Next Page
Loading...
Need help?
General
