Need help?Do you have a question about the Unico IS30G080 and is the answer not in the manual?
Defines the temperature ranges for cooling and heating operations.
Table detailing compatible outdoor and indoor unit combinations.
Specifies lineset diameters and design limits for tubing length and height.
Lists maximum allowable lengths for linesets based on system configuration.
Details factory charge and procedures for adding refrigerant.
Provides physical dimensions for the IS18G050 model and installation clearances.
Provides physical dimensions for IS30G080 and IS36G110 models.
Lists required tools and materials for system installation.
Details electrical power supply specifications for indoor and outdoor units.
Step-by-step guide for mounting and connecting the outdoor unit, including linesets.
Diagrams and instructions for connecting refrigerant lines for various system configurations.
Electrical wiring diagrams for connecting indoor and outdoor units for different system sizes.
Specific instructions for installing SDHV air handlers and their control box wiring.
Explains supplemental and auto changeover heating modes for the iSeries system.
Guides on selecting indoor unit models and configuring switch settings.
Instructions for setting communication channels between remotes and indoor units.
Method for setting refrigerant circuit numbers using DIP switches.
How to access and use the SFM to adjust system parameters and settings.
Diagrams of circuit boards and wiring for SDHV indoor units.
Diagrams of circuit boards and wiring for various outdoor unit models.
Lists of spare parts with corresponding item numbers for different models.
Information on diagnosing issues using service logger, firmware upgrades, and pressures.
Explains LED status codes for MMI/IR receiver and outdoor units to identify faults.
To Next Page
General