Need help?Do you have a question about the Unico PowerSpin C8624 and is the answer not in the manual?
General| Max Speed | 6000 RPM |
|---|---|
| Capacity | 6 x 50 ml |
| Power Supply | 110V/60Hz or 220V/50Hz |
| Weight | 12 kg |
| Dimensions | 360 x 360 x 280 mm |
Overview of UNICO's commitment to quality and product innovation.
Details the centrifuge's design for laboratory separation tasks.
Lists key operational and safety features of the centrifuge.
Describes the materials and build of the centrifuge for durability.
Lists the items included with the centrifuge purchase.
Guidance on checking for and reporting shipping damage.
Steps for preparing the centrifuge for initial use.
Essential checks before operating the centrifuge, like foam removal.
Identifies components and layout of the centrifuge control panel.
How to set, review, and change the timer during operation.
How to set, review, and change the speed during operation.
Explanation of how to start the centrifuge and its safety interlocks.
Functions of the Stop and Open buttons on the control panel.
Procedure for manually opening the lid in emergencies.
How to check the total number of centrifuge cycles.
Step-by-step guide for running a typical centrifuge cycle.
Critical warning about not opening the lid while the rotor is spinning.
Importance of balancing tubes for safe and effective operation.
Guidelines for cleaning and maintaining the centrifuge.
Recommended calibration frequency and precautions for electrical/biohazards.
How to contact UNICO for repairs and warranty issues.
Diagnosing and resolving issues like no start or excessive noise.
Step-by-step guide for safely replacing the centrifuge fuse.
Detailed steps for replacing the fuse using a screwdriver.
Key performance parameters like speed, capacity, and dimensions.
Details the warranty period, coverage, and exclusions.
Specifies what is not covered by the warranty, like unauthorized modifications.
Visual guide identifying key parts of the PowerSpin C8624.
To Next Page