unicraft PG-I 8 SR User Manual

Instruction Manual
Generator
PG-I 8 SR, PG-I 12 SR
PG-I 20 SR, PG-I 35 SE
PG-I 12 SR
PG-I 35 SE

unicraft PG-I 8 SR Specifications

General

Brand	unicraft
Model	PG-I 8 SR
Category	Portable Generator
Language	English

Summary

Imprint

Product Identification

Details specific generator models and their item numbers.

Manufacturer Information

Provides contact details and address of the manufacturer, Stürmer Maschinen GmbH.

Operating Instructions Notes

Information regarding the edition, version, language, and author of the manual.

Copyright Notice

Statement regarding the copyright ownership and usage restrictions of the manual's content.

Introduction

Copyright Protection

Outlines the copyright of the manual's content and prohibits unauthorized use or reproduction.

Customer Service Access

Directs users to contact dealers for questions or technical advice regarding the generator.

Liability Limitations

Clarifies manufacturer's liability regarding damages due to non-compliance or improper use of the generator.

Safety

Symbol Explanation

Explains the meaning of safety symbols and signal words used throughout the manual.

Operator Obligations

Defines the responsibilities of the operating company for safe generator use and compliance with regulations.

Staff Qualification Requirements

Specifies the necessary qualifications and training for personnel operating the generator safely.

Personal Protective Equipment (PPE)

Lists and describes essential PPE like hearing protection, goggles, and gloves for safe operation.

General Safety Instructions

Provides critical safety rules, including ventilation, grounding, and handling precautions.

Intended Use

Predictable Misuse Scenarios

Lists dangerous situations that can arise from improper or unintended generator operation.

Technical Data

Transport, Packaging, Storage

Delivery and Inspection

Instructs users to check for transport damage upon delivery and report any issues immediately.

Transport Guidelines

Provides instructions for safe transport, including using appropriate vehicles and securing the load.

Internal Transport Risks and Precautions

Highlights dangers during internal transport, like tipping, and necessary precautions.

Packaging Materials and Disposal

Details the recyclability of packaging materials and proper disposal methods.

Storage Conditions

Provides guidance on storing the generator in a dry, clean, frost-free environment and periodic starting.

Type Plate Information

Device Description

PG-I 8 SR, 12 SR, and 20 SR Models

Illustrates and labels the parts of the PG-I 8 SR, 12 SR, and 20 SR generator series.

PG-I 35 SE Model Description

Illustrates and labels the parts specific to the PG-I 35 SE generator model.

Control Panel Overview

Introduces the control panels and their functions across different generator models.

Control Panel PG-I 8 SR

Details the layout and components of the control panel for the PG-I 8 SR model.

Control Panel PG-I 12 SR

Details the layout and components of the control panel for the PG-I 12 SR model.

Control Panel PG-I 20 SR

Details the layout and components of the control panel for the PG-I 20 SR model.

Control Panel PG-I 35 SE

Details the layout and components of the control panel for the PG-I 35 SE model.

Operating Elements and Functions

Energy Saving Function

Describes the function of the ECO switch for optimizing fuel consumption and noise levels.

LED Indicators and Displays

Explains the meaning of various LED lights indicating operation status or faults.

Motor Controls and Safety Features

Covers the ON/OFF switch, DC circuit breaker, and oil level sensor for safe operation.

Commissioning

Fuel and Choke Operation

Explains how to operate the fuel tap and choke for starting the engine.

Electrical Connections and Grounding

Details how to connect the generator to consumers and the importance of proper grounding.

Unpacking and Initial Checks

Provides steps for safely unpacking the generator and performing initial inspections.

Fueling Procedure

Details the correct steps for filling the fuel tank, including safety warnings.

Engine Oil Check and Fill

Guides on how to check and top up the engine oil, including oil type recommendations.

Generator Grounding

Explains the importance and procedure for grounding the generator to prevent electric shock.

Control Lamp Functionality

Describes the meaning and operation of the control lamp on the PG-I 35 SE model.

Operation

Battery Installation for PG-I 35 SE

Provides instructions for correctly installing the battery in the PG-I 35 SE generator.

Generator Startup

Starting Procedure: PG-I 8/12/20 SR

Outlines the steps for starting the PG-I 8 SR, 12 SR, and 20 SR generator models.

Fuel Tap and Motor Switch Control

Explains the operation of the fuel tap and the motor switch for initiating startup.

Starting Sequence and Warm-up Steps

Details the sequence of actions, including priming and warm-up, for successful engine start.

Starting Procedure: PG-I 35 SE (Cable Start)

Step-by-step guide for starting the PG-I 35 SE generator using the cable start method.

Starting Procedure: PG-I 35 SE (Electric Start)

Step-by-step guide for starting the PG-I 35 SE generator using the electric start method.

Operation

Generator Shutdown Procedure

Details the correct steps for safely switching off the generator and its connected consumers.

Generator Operating Workflow

Outlines a typical sequence for warming up, connecting, and operating the generator with loads.

Connecting Consumers

Power Requirements Calculation

Explains how to calculate and manage the power load from connected consumers.

Charging Batteries

Provides instructions for charging 12V batteries using the generator's DC output.

Consumer Capacity Table

Care, Maintenance, and Repair

Cleaning the Generator

Provides instructions and precautions for cleaning the exterior of the generator.

Maintenance and Repair Overview

Emphasizes that maintenance and repair should be performed by qualified specialists.

Scheduled Maintenance Tasks

Outlines a maintenance schedule based on operating hours or time intervals.

Engine Oil Change

Provides step-by-step instructions for performing an engine oil change, including safety precautions.

Oil Filter Maintenance

Explains how to clean or replace the oil filter as part of regular maintenance.

Air Filter Maintenance

Details the process for cleaning or replacing the air filter to ensure engine performance.

Fuel Filter Maintenance

Provides instructions for maintaining the fuel filter at specified intervals.

Spark Plug Maintenance

Guides on checking, cleaning, and replacing the spark plug for optimal engine starting.

Filter and Spark Protection

Details the maintenance schedule for the filter and spark protection elements.

Disposal and Recycling

Decommissioning Procedures

Outlines steps for safely decommissioning a used generator unit.

Lubricant Disposal Guidelines

Advises on the proper disposal of used lubricants and greases.

Disposal via Municipal Points

Explains how to dispose of electrical equipment through designated collection points.

Troubleshooting

Fault Diagnosis and Solutions

Lists common generator faults, their possible causes, and recommended removal steps.

Spare Parts

Ordering Spare Parts

Details the information required and process for ordering genuine spare parts.

Spare Parts Drawings

Visual guides to identify and order specific replacement parts for the generator.

PG-I 8 SR Spare Parts

Illustrated breakdown of the PG-I 8 SR generator showing all component parts with numbers.

PG-I 12 SR Spare Parts

Illustrated breakdown of the PG-I 12 SR generator showing all component parts with numbers.

PG-I 20 SR Spare Parts

Illustrated breakdown of the PG-I 20 SR generator showing all component parts with numbers.

PG-I 35 SE Spare Parts

Illustrated breakdown of the PG-I 35 SE generator showing all component parts with numbers.

Electrical Circuit Diagrams

PG-I 8 SR and 12 SR Circuit Diagram

Detailed electrical schematic for the PG-I 8 SR and 12 SR generator models.

PG-I 20 SR Circuit Diagram

Detailed electrical schematic for the PG-I 20 SR generator model.

PG-I 35 SE Circuit Diagram

Detailed electrical schematic for the PG-I 35 SE generator model.

EC Declaration of Conformity