2 SSK 4 | Version 1.08
Imprint
Product identification
Sandblasting Cabinet Item number
SSK 4 6204004
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Hotline: 0049 (0) 900 19 68 220
(0.49 € if calling from the German fixed net-
work)
Fax: 0049 (0) 951 96555 - 55
E-Mail: info@unicraft.de
Internet: www.unicraft.de
Indications regarding the operating instructions
Original instructions
Edition: 08.12.2017
Version: 1.08
Language: english
Author: MS/KP
Indications regarding the operating instructions
Copyright © 2018 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Content
1 Introduction .............................................................3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability............................................. 3
2 Safety........................................................................3
2.1 Symbol explanation ............................................ 3
2.2 Obligations of the operating company ................ 4
2.3 Requirements to staff.......................................... 4
2.4 Personal protective equipment ........................... 5
2.5 Safety information .............................................. 5
3 Intended use ............................................................6
3.1 Nameplate .......................................................... 6
4 Technical data .........................................................6
5 Transport, packaging, storage...............................6
6 Device description ..................................................7
6.1 Delivery............................................................... 7
7 Assembly, Setting up and connecting ..................8
7.1 Assembly ............................................................ 8
7.2 Electrical connection........................................... 8
7.3 Compressed air connection ................................ 9
8 Commissioning .......................................................9
9 Care, maintenance and overhaul.........................10
9.1 Care by cleaning............................................... 10
9.2 Maintenance and repair.................................... 11
9.3 Troubleshooting................................................ 11
10 Disposal, recycling of used devices..................12
10.1 Decommissioning ........................................... 12
10.2 Disposal of lubricants...................................... 12
11 Spare parts...........................................................13
11.1 Ordering spare parts....................................... 13
11.2 Spare parts drawing........................................ 14
12 Electric circuit diagram.......................................16
13 EC Declaration of Conformity ............................17
14 Attachment...........................................................18
To Next Page
Loading...