6 SSK 4 | Version 1.08
Intended use
The following safety labels and symbols are appropriate:
Fig. 1: Safety markings on the sandblasting cabinet SSK 4
3 Intended use
The sandblasting cabinet SSK 4 must only be used to
Rust removal and cleaning of metal surfaces with air
tools using sandblasting with grain size of 0,12 mm -
0,25 mm.The working pressure may be max. 8.6 bar
amount. The work may only be carried out in the closed
box, attention must be paid to absolute tightness.
The sandblasting cabin may only be operated by per-
sons who have been instructed in the device.
Proper use also includes compliance with all information
in this manual. Any use beyond the intended use or
otherwise is considered misuse.
For structural and technical changes to the sand blasting
cabin, the company Stürmer Maschinen GmbH assumes
no liability.
Claims of any kind due to damage due to improper use are
excluded.
3.1 Nameplate
Fig. 2: nameplate of the sandblasting cabinet SSK 4
4 Technical data
5 Transport, packaging, storage
Delivery
Check the sandblasting cabin for visible transport da-
mage after delivery. If you discover any damage, imme-
diately report it to the transport company or the dealer.
Model SSK 4
Volume work cabin 825 liter
working pressure 3,4 - 8,0 bar
Inlet pressure max. 8,6 bar
suction 17,4 m
3
/h
Blasting agent particle
size
0,12 - 0,25 mm
Compressed air connec-
tion
3/8“
air requirements 400 - 800 Liter/min
Electrical connection 230 V / 50 Hz
max. weight of blasting
material
75 kg
max. weight on the sup-
port grid
150 kg
Inside dimensions wor-
king cabin (LxWxH)
1160 x 870 x 850 mm
Dimensions LxWxH 1320 x 1200 x 1760 mm
Weight 160 kg
To Next Page
Loading...