To Next PageTo Next PageWhat to do if LED has no power on Uniden Speakers?
If the LED on your Uniden Speakers has no power, first ensure that the BTS200 is turned on. If it's on and the LED still isn't lit, make sure the BTS200 is adequately charged.
What to do if sound is too small on Uniden Speakers?
If the sound from your Uniden Speakers is too small or has too much distortion, adjust the volume level on either the BTS200 or your Bluetooth device.
What to do if my Uniden Speakers volume controls are not working?
If the volume controls on your Uniden Speakers aren't working, try adjusting the volume directly from your Bluetooth device. Also, check the battery level of your speaker, as a low battery can sometimes affect functionality.
What to do if sound is not clear on Uniden Speakers?
If the sound from your Uniden Speakers isn't clear, or there's no sound, check the volume level on both the BTS200 and your Bluetooth device.
Why music won’t play on the Uniden Speakers?
If music won’t play on your Uniden Speakers, ensure your Bluetooth device supports A2DP. Check that both devices are connected. Try turning your BTS200 off and then back on to automatically connect with your Bluetooth device.
How to fix Uniden Speakers disconnection due to Out of Range?
If your Uniden Speakers disconnect due to being out of range, press the “Stand-by or Phone” key for reconnection after you are back within connection range.
What to do if music won’t play on my Uniden BTS200 Headsets?
If music isn't playing on your Uniden BTS200 Headsets, please check the following: * Ensure your Bluetooth device supports A2DP. * Confirm that both devices are properly connected. * Try turning your BTS200 off and then back on to automatically connect with your Bluetooth device.
How to reconnect Uniden Speakers after disconnection due to out of range?
If your Uniden Speakers disconnect due to being out of range, press the key for reconnection after moving back into the connection range.
How to fix sound too small or too much distortion on Uniden Speakers?
To fix sound that is too quiet or distorted on your Uniden Speakers, adjust the volume level on both the BTS200 speaker and your Bluetooth device.
What to do if music won’t play on Uniden Speakers?
If music won't play on your Uniden Speakers, ensure your Bluetooth device supports A2DP. Also, verify that both devices are properly connected. If the issue persists, try turning your BTS200 off and then back on to automatically reconnect with your Bluetooth device.
Steps to insert the battery into the speaker.
Steps to pair Bluetooth devices to the speaker.
How to use the speaker for phone calls, including answering and ending.
Controlling music playback via Bluetooth or wired connection.
Troubleshooting common problems like disconnection, sound issues, or controls.
Procedure to reset the speaker to factory settings.
General
