To Next Page
A
Angel HarrisAug 3, 2025
How to stop irregular beeping from Uniden BW4151 Baby Monitor?
- LLeah SmithAug 3, 2025
To stop the irregular beeping, go to the Alert screen to turn the alert volume down or off.
How to stop irregular beeping from Uniden BW4151 Baby Monitor?
To stop the irregular beeping, go to the Alert screen to turn the alert volume down or off.
How to fix audio problems with Uniden BW4151?
To address audio problems, ensure there is sound within range of the camera's microphone. If the unit emits a loud screeching noise, move the camera or monitor farther apart.
What to do if there is no picture from Uniden BW4151 Baby Monitor?
If there is no picture from the camera, check all connections to the camera, ensuring the adapter is plugged in. Also, verify that both the camera and monitor are turned ON and that the camera is within range of the monitor.
What to do if Uniden Baby Monitor picture keeps dropping?
If the picture keeps dropping, try moving the camera closer to the monitor or repositioning the camera, the monitor, or both to improve reception. You can also adjust the monitor antenna to a vertical position.
Why Uniden BW4151 Baby Monitor picture has become choppy?
If the picture has become choppy, try moving the camera closer to the monitor. Also, remove any obstructions between the monitor and the camera, and adjust the monitor and camera antennas to a vertical position.
What to do if Uniden BW4151 Baby Monitor picture has frozen?
If the monitor picture has frozen, use a blunt object like a paper clip to press the RESET button to reset the monitor. The monitor will turn off, then press the POWER button to turn it back on.
General| Camera | Yes |
|---|---|
| Night Vision | Yes |
| Range | Up to 1000 feet |
| Two-Way Communication | Yes |
| Temperature Sensor | Yes |
| Vibration Alert | Yes |
| Low Battery Indicator | Yes |
| Out of Range Indicator | Yes |
| Sound Activation | Yes |
| Power Source | Rechargeable battery |
Explains where to place the camera for optimal performance and reception.
Details the steps to connect and power the camera using the USB cable and adapter.
Explains how to connect and power the monitor, including initial charging instructions.
Introduces user-definable settings and how to access the monitor menu.
Step-by-step guides on how to pair and delete cameras from the system.
