Uniden UBW2101 User Manual (English)

Questions and Answers:

J
Jerry HodgeJul 30, 2025
What to do if Uniden UBW2101 Baby Monitor shows 'No Signal'?
- M
  Melissa DoyleJul 30, 2025
  If your Uniden Baby Monitor displays a 'No Signal' message, there are several potential causes: * The camera may not be getting power because the power adapter or cable is disconnected, or the battery is low. Check these connections and the battery level. * The camera might not be properly paired with the receiver. Please refer to the pairing operation for detail. * The camera could be out of range. Try moving the camera closer to the monitor. * The signal might be blocked. Try removing obstacles between the camera and monitor or moving the camera to a different location.
L
Lindsey LesterAug 4, 2025
Why is the signal low or unstable on my Uniden Baby Monitor?
- J
  James SmithAug 4, 2025
  A low or unstable signal on your Uniden Baby Monitor can be due to several factors: * The camera and monitor position may need adjustment due to antenna directional limitations. * Obstacles might be blocking the signal. Try removing any obstructions between the camera and monitor, or relocate the camera. * Nearby strong radio signals, such as from a WiFi router, can interfere. Keep the WiFi router away from the camera and monitor. * Strong electromagnetic interference from working motors (like hair dryers, electric heaters, air conditioners, or water pumps) or microwave ovens can also cause issues. Ensure these are kept away from the camera and monitor.
A
Adam McculloughAug 9, 2025
What to do if Uniden UBW2101 Baby Monitor screen is black and buttons don't work?
- M
  Mr. Brandon EvansAug 9, 2025
  If your Uniden Baby Monitor screen is black and the buttons are not functioning, it's likely that the power save mode is activated. Press the power key to resume receiving the image. Please refer to Power Saving section on page 12 for details.
D
Daniel RichardsonAug 14, 2025
How to stop audio feedback on Uniden UBW2101?
- J
  Jeremy RiceAug 14, 2025
  Audio feedback on your Uniden Baby Monitor usually occurs when the camera and receiver are too close to each other. The camera has a high-sensitivity microphone, so keep the camera at least 10 feet away from the receiver. If the camera must be within 10 feet of the receiver, keep the volume down.
C
cchavezAug 19, 2025
What to do if recording does not work on Uniden UBW2101?
- J
  jparkerAug 19, 2025
  If the recording function isn't working on your Uniden Baby Monitor, here are a couple of things to check: * Make sure an SD card is inserted into the SD card slot. * Verify that the SD card is not locked. If it is, unlock it.
W
walkerbradleyAug 25, 2025
Why VOX Record & Alarm do not work on Uniden Baby Monitor?
- B
  Brenda JohnsonAug 25, 2025
  If the VOX Record & Alarm features aren't working on your Uniden Baby Monitor, it's likely that the VOX settings are turned off. Ensure that VOX Sensitivity, VOX Alarm, and VOX Record are all set to ON in the VOX Menu.

Uniden UBW2101 Specifications

General

Camera	Yes
Night Vision	Yes
Range	Up to 600 feet
Two-Way Talk	Yes
Out of Range Indicator	Yes
Low Battery Indicator	Yes
Display Size	2.0 inches
Sound Activation	Yes
Power Source	Rechargeable battery / AC adapter

Summary

Important Safety Precautions

General Safety Warnings

Essential safety guidelines to prevent fire, electric shock, and injury, including water precautions.

Battery and Power Cord Safety

Instructions for safe use and disposal of power cords and batteries to prevent hazards.

Additional Safety and Usage Guidelines

User and Child Safety Warnings

Critical warnings regarding child safety, strangulation hazards, and age restrictions for product use.

Equipment Care and Maintenance

Best practices for equipment care, including ventilation, temperature, pressure, and cleaning for optimal performance.

Baby Monitoring System Components

Camera Unit Overview

Identification and description of all physical parts and indicators on the baby monitor camera unit.

LCD Monitor Unit Overview

Identification and description of all physical parts and indicators on the LCD monitor receiver unit.

Getting Started: Setup and Installation

Camera Connection and Power-Up

Step-by-step guide for connecting the camera's power adapter and turning the unit on.

Monitor Connection and Power-Up

Step-by-step guide for connecting the monitor's power adapter and turning the unit on.

Installation and Basic Camera Operation

Installing the Camera

Instructions for mounting the camera using the goose neck stand on various surfaces.

Camera Operation Basics

Overview of the camera's physical layout and key operational features.

Basic Operation and Indicators

Camera Indicators and Controls

Explanation of the camera's LED indicators and physical controls for basic operation.

Monitor Indicators and Controls

Explanation of the LCD monitor's LED indicators and their meaning during operation.

Advanced Operation: Display Icons

Understanding Display Icons

Detailed explanation of all icons displayed on the monitor screen for system status.

Advanced Operation: Main Menu Settings

Adjusting Screen Brightness

Guide on accessing and adjusting the monitor's screen brightness settings.

System Setup: Time and Factory Defaults

Procedures for setting the system time and date, and restoring factory default settings.

Advanced Operation: Camera Settings

Camera On/Off Control

Instructions for managing the power status of connected cameras via the monitor.

Camera Scan Period

Configuration of the time interval for automatically switching between multiple cameras.

Advanced Operation: Pairing and Saving

Pairing a Camera

Process for pairing additional cameras with the baby monitor system.

Power Saving Mode

How to activate and utilize the power saving mode for battery efficiency.

SD Card Formatting

Steps to format the SD card, essential for storing video recordings.

Advanced Operation: VOX and Brightness Adjustment

VOX Sensitivity and Recording

Setting up voice activation sensitivity and enabling voice-triggered recording.

Detailed Brightness Adjustment

Specific instructions for fine-tuning the monitor's screen brightness.

Advanced Operation: Alarms and Event List

Alarm Setup Configuration

Setting up audible and visual alarms for VOX activation, low battery, and out-of-range conditions.

Event List Management

How to view, play, and delete recorded video clips from the event list.

Understanding Digital Wireless Technology

Wireless Signal Diagnostics

Information on diagnosing and understanding common wireless signal issues.

Improving Signal Quality

Practical advice and tips for optimizing wireless signal strength and clarity.

Image Compression Explained

Explanation of the digital wireless signal compression techniques used.

Troubleshooting Common Issues

"NO Signal" Errors

Troubleshooting steps for resolving "NO Signal" messages on the monitor.

Signal Instability

Solutions for identifying and rectifying issues causing unstable or weak wireless signals.

Recording and Functionality Problems

Guidance on resolving problems with recording functionality and unresponsive unit buttons.

Audio Feedback and VOX Issues

Solutions for common audio feedback and issues with the VOX (voice activation) feature.

Product Specifications and Warnings

Technical Specifications

Comprehensive technical specifications for the camera and monitor units.

Storage Media Capacity

Information on SD card capacities and their corresponding recording time durations.

Battery and Disposal Information

Warnings related to the Lithium-Polymer battery and proper disposal methods.

Regulatory Compliance Information

FCC Compliance Statement

Details on compliance with FCC Part 15 rules for digital devices.

RF Exposure and Other Compliance

Information on RF exposure limits, IC, and CE compliance standards.

One Year Limited Warranty

Warranty Coverage and Duration

Overview of the warranty terms, conditions, and its one-year duration.

Warranty Service Procedure

Instructions on how to obtain warranty service, including shipping details.

Related product manuals

Uniden BW5151R Series