Uniden DECT 3135 - Intercom and Call Transfer

20
To... Press...
transfer a call
INTCOM/CLEAR. The phone puts the call on
hold and prompts you to select the handset
you want to page. When the other handset
accepts the call, you’ll be disconnected (press
TALK/FLASHto rejoin the call).
cancel a transfer
TALK/FLASH to return to the call.
accept a transferred call
INTCOM/CLEAR to answer the page and speak to
the other handset. Then, press TALK/FLASH to
speak to the caller.
Call Transfer
Privacy Mode
• To activate privacy mode on a call in progress, press MENU/SELECT and
select Privacy Mode. As long as privacy mode is on, you’ll see a P in
the display, and no other handsets can join your call.
• Privacy mode turns off automatically when you hang up; you can also
turn it off by pressing MENU/SELECT and selecting Privacy Mode.
Handset to Handset Intercom
• Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
• You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
• If an outside call comes in during an intercom page, the phone cancels
the page so you can answer the incoming call.
• If an outside call comes in during an intercom call, press TALK/FLASH to
hang up the intercom call and answer the outside call.
To... Press...
make an intercom page
INTCOM/CLEAR . Select the handset you want to
talk with, or All to page all handsets at the
same time
cancel a page
END
answer a page
INTCOM/CLEAR or TALK/FLASH
end an intercom call
END. Both handsets return to standby.
# If the T-coil mode is ON , then T will be displayed on the LCD and not P.