Why doesn't my Uniden DECT1588 Cordless Telephone ring when receiving calls?
If your Uniden Cordless Telephone can make calls but doesn’t ring or receive a page, make sure the ringer isn’t turned off.
What to do if my Uniden DECT1588 Cordless Telephone handset is not working?
If your Uniden Cordless Telephone handset isn't working, first check the battery pack connection. If that's not the issue, charge the battery for 15-20 hours. You can also try resetting the handset.
How to fix the charge LED not illuminating on my Uniden DECT1588?
If the charge LED on your Uniden Cordless Telephone doesn’t light up when the handset is in the cradle, check the AC adapter connection. Also, try re-seating the handset in the cradle and cleaning the charging contacts on the handsets.
Why can't my Uniden DECT1588 Cordless Telephone make or receive calls?
If no stations of your Uniden Cordless Telephone can make or receive calls, check the telephone cord connection. If 'Check TEL Line' appears, the cord might not be correctly connected. Try disconnecting the base AC adapter, waiting a few minutes, and then reconnecting it. Also, verify the dial mode.
What to do if one Uniden DECT1588 handset can't make or receive calls?
If a single Uniden Cordless Telephone handset can’t make or receive calls while others can, try moving the handset closer to the base. If that doesn't work, reset the handset.
Why does my Uniden Cordless Telephone handset say 'Unavailable'?
If a Uniden Cordless Telephone handset displays 'Unavailable', move the handset closer to the base. Check if another station has Privacy Mode turned on. Also, ensure the base is plugged in.
Why is Caller ID not working on my Uniden DECT1588?
If no stations of your Uniden Cordless Telephone display Caller ID information, first check if the call was placed through a switchboard. Verify with your telephone company that your Caller ID service is current and that there are no issues with the service. Let incoming calls ring at least twice before answering.
How to make calls during power failure with Uniden DECT1588?
During a power failure, make sure to use the base corded handset of your Uniden Cordless Telephone to make or receive calls. Also, check the telephone cord connection.
Guidelines for selecting an optimal placement for your new Uniden cordless phone base.
Step-by-step instructions for inserting the rechargeable battery pack into the handset.
Instructions on how to properly charge the cordless handset using the AC adapter.
Steps for connecting the phone base to the power adapter and routing the cord.
Instructions for connecting the phone base to the telephone wall jack, including DSL considerations.
Procedures to verify the phone connection, including troubleshooting steps for common issues.
Detailed steps for registering new accessory handsets to the base unit.
Instructions for setting the clock for accurate message timestamps.
Steps to store names and phone numbers in the phonebook.
Detailed guide on how to initiate and answer calls using different phone parts.
How to manage incoming calls when you are already on a call.
Moving an active call from one station to another.
Steps to record a custom outgoing greeting for the answering system.
Instructions for activating and deactivating the answering system from base or handset.
Controlling the answering system remotely using the handset.
Procedures for listening to new and old messages from the base or handset.
Instructions for remotely managing the answering system via phone.
Establishing a PIN for secure remote access to the answering system.
General| Type | Cordless Telephone |
|---|---|
| Technology | DECT 6.0 |
| Caller ID | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Handset Locator | Yes |
| Display Type | LCD |
| Intercom | Yes |
| Expandable | Yes |
| Backlit Display | Yes |
| Battery Life | Up to 5 days standby |
| Answering System | Digital answering system |
To Next Page