Charging the Handset
Place the handset in the charging
cradle with the display facing forward.
Connect the AC
adapter to the
AC IN 8V jack and
route the cord
through the molded
wiring channel.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
What if the charge LED doesn’t light up?
Reseat the handset; make sure the
contacts on the bottom of the handset are
lined up with the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Charge your handset at least 15 to 20 hours before plugging into the phone line.
To Next Page
Loading...
Need help?
General
