Why does my Uniden Portable Radio stop on a channel while scanning?
Your Uniden Portable Radio might be stopping on a particular channel during scanning because of a nearby noise source. Try to eliminate the source of the noise. Alternatively, you can delete the channel from the scanner.
What to do if Uniden Marine Radio Portable Radio reverts to Ch.16 when Tx key is pressed?
If your Uniden Portable Radio reverts to Ch.16 when the Tx key is pressed, it could be due to low current or voltage. Connect the radio to a 12VDC power source that can supply at least 4 Amps.
General| Brand | Uniden |
|---|---|
| Model | Marine Radio |
| Category | Portable Radio |
| Language | English |
Important warning regarding restricted channels and licensing for radio operation.
Details the controls and indicators on the front panel of the OCEANUS radio unit.
Describes the connectors located on the rear panel of the OCEANUS for power and accessories.
Explains the various status indicators displayed on the OCEANUS LCD panel.
Details the operation and functions of the OCEANUS multi-function keys.
Factors to consider when selecting a suitable mounting location for the OCEANUS on a vessel.
Addresses potential interference from engine electrical systems and methods for noise reduction.
Guidance on selecting and positioning an antenna for optimal radio range and performance.
Step-by-step instructions for mounting the OCEANUS unit and connecting cables securely.
How to activate and use the Triple Watch feature for monitoring multiple channels simultaneously.
Procedure for manually selecting communication and weather channels on the OCEANUS.
Quick access to emergency and important marine communication channels like 16 and 9.
Instructions for scanning and monitoring NOAA weather channels for forecasts and alerts.
How to select different channel mode operations: USA, International, or Canadian.
Guide to storing channels for memory scan functionality for quick access.
How to initiate and use the memory scan feature for pre-selected channels.
Activating and using the Public Address mode for broadcasting messages over the radio.
How to activate the Weather Alert mode for receiving severe weather warnings.
Instructions on how to transmit, including power settings and PTT usage.
How to adjust the brightness of the OCEANUS LCD display for optimal visibility.
Explanation of the automatic transmitter shut-off feature to prevent damage and interference.
To Next Page
