EasyManua.ls Logo

Uniden PC33X User Manual

Uniden PC33X
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
="~
~c~=--
uni' en@
. PC33X
40 Channel
MobileCB Radio
.. --~
.
,--_...
--'..--.-
Question and Answer IconNeed help?

Do you have a question about the Uniden PC33X and is the answer not in the manual?

Uniden PC33X Specifications

General IconGeneral
BrandUniden
ModelPC33X
CategoryPortable Radio
LanguageEnglish

Summary

INTRODUCTION

WARNING

Before transmitting, obtain a D.O.C. Citizens Radio Licence and read licensing conditions.

CONTROLS AND THEIR FUNCTIONS

RF POWER/"S" METER

LED meter shows radio frequency power when transmitting and incoming signal strength when receiving.

SQUELCH CONTROL

Eliminates background noise; adjust to eliminate noise without cutting off weak signals.

CHANNEL SELECTOR SWITCH

Selects desired channel for transmission/reception; Channel 9 reserved for emergency use.

Connectivity Ports

Connects antenna via SO-239 connector and external speaker via 3.5mm jack.

OPERATION

OPERATING RECEIVE PROCEDURE

Steps for receiving: check connections, turn on unit, select channel, set volume, adjust squelch.

OPERATING TRANSMIT PROCEDURE

Steps for transmitting: read D.O.C. rules, select channel, press PTT, speak clearly.

PREVENTIVE MAINTENANCE

Regular system checks including SWR, electrical connections, antenna cable, and hardware tightness.

INSTALLATION

MOBILE STATION INSTALLATION

Plan transceiver/microphone placement for convenience and safety; secure unit using mounting bracket.

MOBILE STATION ANTENNA

Emphasizes using a quality antenna for transmission distance; consult local dealer for selection.

CONNECTING THE POWER CORDS

Connect power to ignition switch terminal or fuse block; ensure proper connection and prevent short circuits.

Grounding System Installation

Instructions for connecting the transceiver to negative or positive ground DC systems in vehicles.

SPECIFICATIONS

OPERATOR TROUBLESHOOTING

Inoperative Transceiver

Troubleshooting steps for a completely inoperative transceiver, starting with power cord and fuse.

Receiving Problems

Troubleshooting steps for receiving issues, checking volume control, squelch, and operational mode.

Transmitting Problems

Troubleshooting steps for transmitting issues, checking antenna connection, cable security, and corrosion.

WARRANTY

Related product manuals