EasyManua.ls Logo

Uniden UH015sx User Manual

Uniden UH015sx
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
UNIDEN Model uh015sx UHF
CB Radio

Other manuals for Uniden UH015sx

Question and Answer IconNeed help?

Do you have a question about the Uniden UH015sx and is the answer not in the manual?

Uniden UH015sx Specifications

General IconGeneral
BrandUniden
ModelUH015sx
CategoryPortable Radio
LanguageEnglish

Summary

Uniden uh015sx Controls and Connectors

Front Panel Controls and Display

Details the buttons, knobs, and LCD display on the front of the transceiver.

Rear Panel Connectors

Identifies the external connection ports on the rear of the uh015sx.

Uniden uh015sx Operation: Basic Functions

Uniden uh015sx Operation: Transmitting and Duplex

Transmitting Procedures

Instructions for transmitting voice signals using the PTT button and microphone.

Uniden uh015sx Operation: Scanning Modes

Scanning Feature Overview

Introduction to the radio's scanning capabilities, including Open Scan.

Uniden uh015sx Operation: Group Scan and Memory

Uniden uh015sx Operation: Search and Manual Programming

Wide Band Searching Feature

How to search for active frequencies across the 400-512MHz range.

Uniden uh015sx Operation: Frequency Copying

Uniden uh015sx Operation: Advanced Features

Uniden uh015sx Operation: CTCSS and DCS

CTCSS Squelch System

Enables receiving signals only from callers with the same CTCSS code.

DCS Squelch System

Explains the digital extension of CTCSS for selective coded squelch.

Uniden uh015sx Selective Calling Overview

Uniden uh015sx Selective Calling Activation and Reception

Activating and Deactivating Quiet Mode

Steps to enable and disable the Selcall 'Quiet' mode for selective reception.

Incoming Selcall Handling

Describes automatic responses and alerts when a matching Selcall ID is received.

Uniden uh015sx Tone Squelch Scanning and Tone Calling

Tone Squelch Scanning Operation

Monitoring multiple channels for selective calls using TSQ scanning.

Initiating Tone Calling

How to initiate a selective call to another radio using its Selcall ID.

Uniden uh015sx TX Selcall Programming

Programming 5/6 TX Tone Selcall ID

Step-by-step guide to setting the transmitter's Selcall identification code.

Uniden uh015sx Group Calling

TX Selcall ID Format for Group Calls

Details the format for programming Selcall IDs for group calling.

Uniden uh015sx 5/6 Tone Selcall Programming Outline

Uniden uh015sx Programming Your Receiver Selcall ID

Uniden uh015sx Selecting 5 or 6 Tone Format for Selcall ID

Uniden uh015sx Other Selcall Parameters

Uniden uh015sx Tone Period Setting

Uniden uh015sx Lead-in Delay

Uniden uh015sx Lead-in Delay Programming

Uniden uh015sx Lead-in Tone

Uniden uh015sx Lead-in Tone Programming

Uniden uh015sx Alarm Mode Settings

Uniden uh015sx Alarm Mode Configuration

Uniden uh015sx Group Call Mode

Uniden uh015sx UHF CB Channels and Frequencies

Uniden uh015sx CTCSS and DCS Code Lists

Related product manuals