Uniden UH835S Series Troubleshooting

UH9060/UH9080
Controls & Indicators Reset Procedure
1 POWER - Power Button
2 SMART - Multiple Function
3 PTT - Push To Talk Button
4 MENU - Menu Button/
/ENTER - Enter Button
- Move selection left
5 HOLD - Hold Button
/TRIPLE - Triple Watch Button
6 - Channel Up Button/Select Up Button
7 - Channel Down Button/Select Down Button
8 MICROPHONE
9 SPEAKER
10 Liquid Crystal Display (LCD)
11 DCS/CTCSS - DCS & CTCSS Button
/POLICE - Police/CB/Fire Button
1
/ - Move selection right
12 SCAN - Scan Button
/MEM - Memory Button
13 - Volume Up Button
14 - Volume Down Button
15 TSQ - Tone Squelch Channel
/Close Call - Close Call Button
1
16 REPLAY - Replay Button
/SELCALL - Selective Calling Button
1
This feature applies to UH9080 only
• Initialize to factory setting not
including recorded audio.
Turn the unit off, Press and hold
‘’MENU’’& “REPLAY” buttons on
the MIC together at the same
time and turn the power back on.
After 15 seconds turn power back
off then on
• Reset All including recorded
audio.
Turn the unit off, Press and hold
‘’MENU’’& “Replay” & “DCS/
CTCSS” buttons together on the
MIC at the same time and turn
the power back on. After 15 sec-
onds turn power back off then on.
1
3
4
5
6
7
8
9
16
10
2
11
12
13
14
15

Uniden UH835S Series Specifications

General

Brand	Uniden
Model	UH835S Series
Category	Transceiver
Language	English