Need help?Do you have a question about the UniFi Security Gateway Pro and is the answer not in the manual?
General| Model | USG-PRO-4 |
|---|---|
| Processor | Dual-Core 1 GHz |
| Flash Storage | 4 GB |
| Routing Throughput | 4 Gbps |
| Weight | 2.3 kg (5.07 lb) |
| Button | Reset |
| Firewall Throughput | 4 Gbps |
| IPS/IDS Throughput | 250 Mbps |
| Operating Temperature | -10 to 45° C (14 to 113° F) |
| Certifications | CE, FCC, IC |
| Mounting | Rack-Mountable |
| Ports | 2x RJ45 Gigabit Ethernet |
| Power Supply | Internal AC/DC Power Adapter, 60W |
| Power Input | 100-240VAC |
| LEDs | Power, WAN, LAN |
| Operating Humidity | 5 to 95% Noncondensing |
| Dimensions | 484 x 44 x 164 mm (19.06 x 1.73 x 6.46") |
Details the function of the system status indicator light on the UniFi Gateway.
Explains the RJ45 serial console port for CLI management and its required configuration settings.
Notes that the USB port is reserved for future use.
Clarifies the status indicators for LAN, WAN, and SFP network ports.
Describes RJ45 ports for 10/100/1000 Ethernet and their default IP configuration.
Details RJ45 ports for 10/100/1000 Ethernet and conditions for WAN port activation.
Explains hot-swappable SFP ports for fiber modules and their impact on WAN ports.
Guides on resetting the UniFi Gateway to factory defaults using the reset button.
To Next Page