To Next PageTo Next Page
Need help?Do you have a question about the Uniflair CAL 0801 and is the answer not in the manual?
Read manual, handle nitrogen safely, avoid pressure tampering, beware of burns and sharp fins.
Instructions for checking condition upon delivery, safe handling during transit and unpacking.
Advises on outdoor placement, protection from wind/objects, and configuration options.
Covers positioning on a solid, level surface and securing the unit with bolts.
Warns that the thin aluminum fins can cause cuts if accidentally touched forcefully.
Step-by-step guide to removing plugs and safely discharging factory nitrogen/air.
Details inclining discharge, 'U' traps, insulation, and avoiding contact between lines.
Stresses safety before working, powering off, and isolator position for connection.
Steps to switch on the power supply and close the isolator to initiate operation.
Fans start based on condensing pressure, requiring the compressor circuit to be active.
Outlines checking control settings using a pressure gauge and observing fan behavior.
Explains the TRIAC controller, output voltage, and pressure sensing mechanism.
Details adjusting the SET point and MIN value using specific controls on the pressure sensor.
General| Brand | Uniflair |
|---|---|
| Model | CAL 0801 |
| Category | Air Conditioner |
| Language | English |
