Uniflex HM 200 - User Manual

OPERATING MANUAL
- HM 200
- HM 200 Ecoline
- HM 200 Ecoline DC
- HM 250
- HM 260
Technical Details subject to change EN
Copying and distributing this document and the use or communication of the contents thereof are forbidden without
expressed authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a
patent or the registration of a utility model or design.

Summary

Chapter 1 Introduction

Safety and accident prevention

Emphasizes rules to minimize injuries and protect the machine.

Chapter 2 Safety

Hazards when operating the machine

Discusses potential dangers for operators and property during operation.

Chapter 2 Safety (Continued)

Hazards caused by electrical energy

Covers safety precautions for electrical work and maintenance.

Dangers of hydraulic oil

Warns about environmental risks and skin contact with hydraulic oil.

Maintenance and servicing, trouble-shooting

Advises timely maintenance and safety during servicing.

Chapter 2 Safety (Continued)

Safety installations

Describes emergency switches and safety installations for safe operation.

Hazards and safety measures

Lists personal safety instructions and specific dangers.

Chapter 3 Design (Continued)

Technical Details HM 200 Ecoline, HM 200 Ecoline DC, HM 200, HM 250, HM 260

Chapter 4 Commissioning

Unpacking; set up

Chapter 4 Commissioning (Continued)

Hydraulic Power Unit - Only ECOLINE DC

Connecting the electric supply

HM200 Ecoline Connecting the electric supply

Connecting the electric supply (Ecoline DC only)

Filling with hydraulic oil

Ventilate the Hydraulic System

Chapter 5 Crimping

Quick die change QDC 239.5

Insert the crimp dies 239; 239 L in the machine

Take the crimp dies 239; 239 L out of the machine

Chapter 5 Crimping (Continued)

Set the crimp diameter; Crimp die table PB 239

Details how to set the crimp diameter using a reference table.

Chapter 6 Maintenance

Daily Maintenance works

Lists routine daily checks and cleaning tasks for the machine.

Annual maintenance

Details the procedures for annual maintenance, including oil change.

Chapter 6 Maintenance (Continued)

Calibrate the crimp micrometer

Explains how to recalibrate the crimp micrometer for accurate settings.

Chapter 6 Maintenance (Continued)

Exchange Slide Bearings

Uniflex HM 200 Specifications

General

Brand	Uniflex
Model	HM 200
Category	Power Tool
Language	English