Uniflex HM 250 - User Manual

OPERATING MANUAL
- HM 200
- HM 200 Ecoline
- HM 200 Ecoline DC
- HM 250
- HM 260
Technical Details subject to change EN
Copying and distributing this document and the use or communication of the contents thereof are forbidden without
expressed authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a
patent or the registration of a utility model or design.

Summary

Chapter 1 Introduction

Safety and Accident Prevention

Importance of safety rules and machine's safe design.

Chapter 2 Safety

Safety Information and Obligations

Accident prevention rules, owner/personnel duties.

Machine Hazards and Intended Use

Operational dangers, proper usage, fault remediation.

Personnel Training and Machine Control

Operational Safety Measures

Electrical hazards, hydraulic oil dangers, safe operation.

Safety Installations and Personal Safety

Emergency switches, security, path limits, personal safety.

Chapter 3 Design

Technical Specifications

Detailed technical data for HM 200, HM 250, HM 260 models.

Chapter 4 Commissioning

Electric Supply Connection

Connecting to electrical power and motor rotation checks.

Chapter 5 Crimping

Die Handling and Setup

Crimp Diameter and Table

Chapter 6 Maintenance

Daily and Monthly Checks

Periodic Maintenance

Uniflex HM 250 Specifications

General

Brand	Uniflex
Model	HM 250
Category	Power Tool
Language	English