EC DECLARATION OF CONFORMITY
IN COMPLIANCE WITH:
DIRECTIVE 2006/42/ES AND THE MACHINERY SAFETY RULES
(OFFICIAL GAZETTE OF RS, NR. 75/08, 66/10 and 74/11)
MANUFACTURER:
UNIFOREST D.O.O.
DOBRIŠA VAS 14, 3301 PETROVČE, SLOVENIA
PERSON RESPONSIBLE FOR TECHNICAL DOCUMENTATION:
MARKO POLAK, UNIV.DIPL.INŽ., UNIFOREST,
DOBRIŠA VAS 14, 3301 PETROVČE
DESCRIPTION OF DEVICE - MACHINE:
WINCH:
UNIFOREST 30M, 35M, 40 eco, 50 eco, 40E, 40ER, 40EH, 40Hpro
50E, 50ER, 50EH, 50Hpro, 60E, 60ER, 60EH, 60Hpro,
80E, 80ER, 80EH, 80Hpro
WE DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE ABOVE MENTIONED MACHINE
WINCH:
UNIFOREST 30M, 35M, 40 eco, 50 eco, 40E, 40ER, 40EH, 40Hpro
50E, 50ER, 50EH, 50Hpro, 60E, 60ER, 60EH, 60Hpro,
80E, 80ER, 80EH, 80Hpro
IS COMPLIANT WITH THE FOLLOWING REGULATIONS AND STANDARDS:
DIRECTIVE 2006/42/EC AND THE MACHINERY SAFETY RULES
(OFFICIAL GAZETTE OF RS, NR. 75/08, 66/10 and 74/11)
HARMONISED AND OTHER STANDARDS:
SIST EN ISO 12100:2011 SIST EN ISO 4254-1:2010/ AC:2011
SIST EN ISO13857:2008 SIST EN ISO 4413:2011 ÖNORM L5276:2008
DATE: SIGNATURE OF RESPONSIBLE PERSON:
PETROVČE, 23. 8. 2018 MARKO POLAK, UNIV.DIPL.INŽ.
To Previous Page
Loading...
Need help?
General
