Unify OpenScape DECT Phone SL6 User Manual

10 Setting the display language
¤ Press and hold the End call key
The telephone is now ready for use.
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
• Attaching the belt clip: Press the belt clip onto the back of the
handset so that the tabs on the belt clip click into place in the
notches.
• Removing the belt clip: Press the centre of the belt clip firmly
with your right thumb. Push the nail of your left thumb up
between the clip and the casing. Slide the clip upwards to
remove.
Connecting the headset
¤ Connect the headset with 3.5 mm jack to the left side of the handset .
or
Connecting the USB data cable
For data exchange between the handset and PC:
¤ Connect the USB data cable with micro-USB plug into the USB
socket at the bottom of the handset .
¤ Connect headset via Bluetooth
Connect the handset directly to the PC, not via a
USB hub.
1
1
1
1

Unify OpenScape DECT Phone SL6 Specifications

General

Brand	Unify
Model	OpenScape DECT Phone SL6
Category	Cordless Telephone
Language	English