Unify OpenScape DECT Phone SL6 User Manual

30 Setting the handset
Keypad illumination
The keypad has 5 levels of brightness to choose from.
¤ . . . use to select Settings OK Display & Keypad OK Key
Illumination OK . . . use to select Brightness (1 - 5) Save
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤ . . . use to select Settings OK Display & Keypad OK Auto
Keypadlock Change ( = on)
Tones and signals
Call volume
You can set the volume of the earpiece, handsfree function and headset on 5 levels independently of each
other.
During a conversation
¤ Handset Volume . . . use to select volume Save . . . the setting is saved
In idle status
¤ Handset Volume Use to select what the setting is to apply for (Earpiece / Speaker /
Corded headset) Use to select the volume Save . . . The setting is saved
or
Automatic volume control
The phone is able to automatically adjust the volume of the receiver and ringtone to the ambient volume.
Here you can set the sensitivity with which the phone reacts to changes in noise level (Very High, High,
Medium, Low, Very Low).
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call volumes, here
you can compensate the audio setting characteristics of your headset.
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you improved acous-
tics in loud environments and when there are echoes.
Changes are only saved permanently in Profile Personal.
¤ . . . Use to select Audio Settings OK Handset Volume OK Use
to select what the setting is to apply for (Earpiece / Speaker / Corded headset) Use to
set the volume Save
Crescendo is not set for the ringtone volume ( p. 31).
¤ . . . Use to select Audio Settings OK Smart Volume OK
Earpiece Volume / Ringtone Volume Edit
Enable/disable: ¤ Activation: Use to select On or Off
Adjust the sensor: ¤ Sensitivity Use to adjust the sensor sensitivity
Save: ¤ Save
¤ . . . Use to select Audio Settings OK Corded Hdst Boost Use
to set the volume Save
¤ . . . Use to select Audio Settings OK Mic Sensitivity OK Use to
select what the setting applies for (Earpiece / Corded headset) Use to adjust the
sensitivity Save

Unify OpenScape DECT Phone SL6 Specifications

General

Brand	Unify
Model	OpenScape DECT Phone SL6
Category	Cordless Telephone
Language	English