Need help?Do you have a question about the UniGuard UT04 and is the answer not in the manual?
Technical specifications for GSM, GPS modules, interfaces, battery, voltage, and temperature.
Tracking, image monitoring, and vehicle status monitoring capabilities.
Details on device interfaces, connection diagrams, and installation testing.
Safety alerts (SOS, speed, geofence), remote engine control, and temperature monitoring.
Explains SMS command structure and how to inquire about the device's location.
Commands for changing passwords, setting data intervals, and configuring alarm numbers.
Commands for over-speed alerts, geofencing, engine cut-off, and fuel data collection.
Commands to control camera function and configure GPRS settings like APN and server.
Configuration of APN, server IP address, and port for GPRS communication.
Commands to enable or disable the GPRS communication function.
Steps for logging into the web platform and viewing vehicle status.
Command to retrieve and verify current GPRS settings.
Visualizing the current location of tracked vehicles on the map.
Options for real-time tracking map modes and playback of historical vehicle data.
Accessing captured images and fuel consumption data via the web platform.
Link to a demonstration of the GPS tracking software.
Detailed steps for connecting, calibrating, and using the fuel monitoring system.
How to monitor temperature and door status using sensors.
Using the camera for monitoring and enabling RFID for engine authorization.
How to configure RFID card numbers for driver authorization.
To Next Page
General
