To Next PageTo Next Page
Need help?Do you have a question about the Unika TD-14000 and is the answer not in the manual?
Critical safety alerts regarding electrical shock, heat, and moisture.
Guidelines for safe operation, power connection, and environment.
Instructions for checking the amplifier carton and contents upon arrival.
Guidance on mounting the amplifier into a standard 19-inch rack.
Description of the front panel handles used for carrying and protection.
Controls for adjusting the signal level entering the amplifier.
Explains indicators for over-temperature, VHF, and clip/limit status.
Location of the foam filter for dust prevention.
The main switch used to start and stop the amplifier.
Information on the mains input voltage and connection.
Details on configuring Gain, VPL, and other settings via rear panel DIP switches.
Description of XLR input and loop-thru connectors.
Details on Binding Post connectors for speaker output.
Diagram and explanation of the amplifier's signal processing stages.
How gain and VPL settings affect input sensitivity and output power.
Details on balanced XLR, unbalanced input, and binding post output connections.
Information on adjustable input gain and front-panel level adjustment.
Explanation of VPL and CPL for output protection and control.
Overview of the amplifier's protection features and fault indicators.
Details on SOAD, VHF, DC, high/low impedance, and temperature protections.
Explains PAL, Soft-Start, and global performance indicators.
Details on channel-specific indicators and basic user maintenance.
General