Union Community UBio-X Pro Lite User Manual

Copyright 2000 By Union Community Co., LTD.
UBio-X Pro Lite User Guide
Version Eng-1.07

Union Community UBio-X Pro Lite Specifications

General

Ingress Protection	IP65
Housing Material	Polycarbonate
Ingress Protection Rating	IP65
Connectivity	TCP/IP, RS485
Power Supply	12V DC
Fingerprint Sensor	Optical
Operating Temperature	-20°C ~ 60°C
Authentication	Fingerprint, Card, PIN
Storage Temperature	-40°C ~ 70°C
Camera Resolution	2MP

Summary

Before use

1.1. Safety Precautions

Provides warnings and cautions for safe operation and handling of the terminal.

1.6. How to register and authorize the face properly

Provides guidelines for accurate face registration and successful face authorization.

1.7. Proper fingerprint registration and input methods

Details the correct procedures for registering fingerprints and how to input them effectively.

Environment setting

3.1. Checks before setting the environment

3.3. User Management

Covers all aspects of managing users on the terminal, including adding, deleting, and modifying.

3.4. Network setting

Guides on configuring network parameters like IP address, subnet mask, and gateway.

3.5. Application mode

Details how to set the terminal for different application modes like Access, TnA, and Meal.

3.6. System

Covers system-wide settings including User ID length and authentication modes.

3.7. Terminal

How to use terminal

4.1. How to change Auth mode

4.2. How to input user ID

4.3. How to authorize