UniPOS FD7203 - Warranty; Set up of the Input-Output Module FD7203 Within the System IFS7000

4. Set Up of the Input-Output module FD7203 within the system IFS7000.
Programming of the FD7203 (1 input/1 output) module output is realized from menu “Setup/Loops
/Device Parameters”. Please refer “Instruction manual IFS7002”- т.13.4.3.1 - Menu “Device Parameters”.
Complexity
Input-Output device FD7203 (1input/1output) - 1 бр.
leaet with the installation steps
- 1 бр.
Resistor 5,6 kΩ for the controllable output
- 1 бр.
Resistor 10 kΩ for the input
- 2 бр.
Diode 1N4001
- 1 бр.
Warranty
The warranty period is 36 months from the date of sale, providing that the installation
requirements have been observed.
The manufacturer does not bear warranty liabilities for damages caused through accidental
mechanical damage, misuse, adaptation or modication after production.
Accessory - installation of a modular box/cabinet
For the In-Out module 7203 IO type is available accessory - a modular box consisting of the
module cabinet. The accessory is used to bind (to cover) the cables to the connection terminals.
UniPOS wishes you a successful work !
Manufacturer: UniPOS Ltd., 47 San Stefano Street, Pleven 5800, Bulgaria,
http://www.unipos-bg.com
09/09.19
47, “San Stefano” str., 5800 Pleven, Bulgaria
e-mail: oce_pleven@unipos-bg.com
Oce building UniPOS
1 " Efr..N.Paskalev" str., Mladost 1, Soa 1784, Bulgaria
tel./fax: +359 2 974 44 69, +359 2 974 39 25
e-mail: oce_soa@unipos-bg.com
www.unipos-bg.com