Unipulse F701-C - Page 35

UNIPULSE F701-C 中文技术手册 无锡友波贸易有限公司 0510-82706452/13861775500
· External Function Selection 选购件扩展功能选择
BCD data update rate
BCD 码刷新速率
At discharging weighing time
7: 1 times/sec.
卸料称重时段
6: 2 times/sec.
1：Net weight is displayed with
5: 5 times/sec.
the sign not reversed.
4: 10 times/sec.
显示净重不带负号
3: 20 times/sec.
0：Net weight is displayed with
2: 50 times/sec.
the sign reversed.
1: 100 times/sec.
显示净重带负号（－）
0: 200 times/sec.
(For details, please refer to
(For details, please refer to
"5
-
16" on P.66.)
"
10
-
3
-
9" on P. 137.)
参见第 66 页“5-16”
。
参见第 137 页“10-3-9”
。
Switching Gross weight/Net
Filter in stable condition 滤波 weight display 显示切换毛/净重
1: Not insert 不插入
l: External input mode
0: Insert (128 times) 插入
外部输入模式
(For details, please refer to
0: Internal key mode
"5
-
5" on P.55.)
内部键入模式
参见第 55 页“5-5”
。
(For details, please refer to"5
-
15" on P.65.)
Motion Detection mode 动态检测 参见第 65 页“5-15”
。
1: Checker mode 检测模式
0: Stable mode 稳定模式
(For details, please refer to"5-6" on P.56.) 参见第 56 页“5-6”
。
·Restriction on the Tare Subtraction Function 去皮功能的禁止
One
-
touch Tare subtraction
Tare Weight display with
acceptance condition
the
key
按去皮功能键时接受条件 按「0」键显示皮重
1: Accept only at stable time
1：Valid 有效
仅在稳定时接受
0：Invalid 无效
0: Accept regularly
常规接受
Prohibition of Tare Weight and digital
Range of Tare subtraction
tare subtraction ON/OFF when
去皮范围
one
-
touch tare subtraction is working.
1 :0 < Tare
≤
Capacity
在按皮总功能键有效时，禁止皮重
0 < 皮重≤量程
及数字预置皮重去皮开/关
0: Total range 任何范围 1：Valid 有效 0：Invalid 无效
(For details, please refer to "5-14" on P.64.) 参见第 64 页“5-14”
。
- 35 -