This document is the owner's guide for the Unique Retro Bottom Mount Refrigerator, models UGP-275L W AC, UGP-275L B AC, and UGP-275L R AC. It provides comprehensive information on safety, installation, operation, and maintenance of the appliance.
Function Description:
The Unique Retro Bottom Mount Refrigerator is a domestic refrigeration appliance designed for storing edible/consumable food and drinks. It features a bottom-mounted freezer compartment and a top-mounted refrigerator compartment. The appliance is designed for free-standing installation and is not intended for commercial or industrial use. It operates by pumping refrigerant through coils, with a compressor controlling the cooling process. The interior LED light illuminates the fridge compartment when the door is opened.
Important Technical Specifications:
- Model Numbers: UGP-275L W AC, UGP-275L B AC, UGP-275L R AC.
- Refrigerant: Flammable refrigerant is used.
- Temperature Control: Controlled by a thermostat located on the inside ceiling of the fridge compartment. Settings range from 1 (warmest) to 7 (coldest).
- Optimal Fridge Temperature: 1°C to 4°C (33°F to 39°F) at thermostat setting 4.
- Optimal Freezer Temperature: -10°C to -15°C (14°F to 5°F) at thermostat setting 4.
- Coldest Freezer Temperature: -15°C (5°F) at thermostat setting 7.
- Ambient Temperature Range: The fridge may not function correctly if the room/ambient temperature approaches its operating temperature or exceeds 100°F (38°C).
- Electrical Connection: Requires a properly grounded 3-prong wall outlet. The serial rating plate indicates the designed voltage and frequency. Extension cords or ungrounded adapters should not be used.
- Ventilation: A minimum spacing of 3 inches (7.6 cm) around the appliance is recommended for adequate airflow and efficient operation.
- Dimensions: Not explicitly stated, but the appliance is described as heavy, requiring care during movement.
- Certifications: Intertek 5013515 listed.
Usage Features:
- Initial Setup: After transit, the fridge must be in a level, upright position for 12 hours before connecting to power to allow compressor fluids to redistribute. It should run empty for at least 4 hours to cool down properly before adding food.
- Temperature Adjustment: The thermostat knob allows users to set the desired internal temperature. Larger numbers indicate colder settings. Adjustments may be necessary based on ambient temperature, quantity of stored items, and door opening frequency.
- Loading: Avoid packing food too tightly around cooling plates to ensure proper air circulation. When adding unfrozen food to the freezer, fill it only 1/3 full initially and wait for it to freeze before adding more. Smaller containers help food cool more quickly.
- Door Operation: Doors are fitted with uniform sealing strips. It may be difficult to open the door immediately after closing due to air contraction, but pressure equalizes within seconds.
- Leveling: Adjustable legs on the bottom front of the appliance allow for leveling.
- Energy Saving Tips:
- Avoid installing near heat sources or direct sunlight.
- Ensure adequate ventilation around the cabinet.
- Pack food and liquids in airtight packages to prevent frosting.
- Allow space for air circulation around stored items.
- Avoid keeping doors open for extended periods or opening them too frequently.
- Ensure doors close properly and form a tight seal.
- Maintain fridge temperatures between 2°C/36°F and 4°C/39°F for safe food storage.
Maintenance Features:
- Cleaning:
- Internal: Wash with lukewarm water and mild soap (or a mixture of two tablespoons of baking soda to 1 quart warm water). Avoid abrasive or corrosive cleaning agents, steel wool, scouring sponges, or chemical cleaning products. Rinse thoroughly and dry.
- External: Wash with warm water and mild soap or detergent. Avoid abrasive or corrosive cleaning agents.
- Always disconnect from the electrical supply before cleaning.
- Defrosting: This appliance does not have an "Auto Defrost" option. Manual defrosting is required when frost becomes thick on interior walls.
- Procedure: Disconnect power, remove food (store in coolers), leave doors open, plug the defrost water drain, place a bowl of hot (not boiling) water inside (optional), wash and dry interior, reconnect power, allow to cool for at least 2 hours, then reload food.
- Caution: Never use sharp metal tools or heat sources (electric/gas heaters) to defrost, as this can damage the appliance.
- Water Catch Basin: Located at the back of the fridge, it collects defrost water which then evaporates from the hot condenser coil.
- Power Failure: Most power failures are short and should not affect internal temperature if doors are kept closed. If the power is off for a longer period, protect contents. Wait 3 to 5 minutes before restarting the refrigerator after an interruption.
- Vacation:
- Short (less than three weeks): Leave appliance operating.
- Long (several months): Remove all items, disconnect power, clean and dry interior thoroughly, and leave door slightly open to prevent odor and mold.
- Moving: Remove all items, tape down shelves, turn up adjustable legs, tape doors shut, and keep the appliance upright during transportation. If placed on its back or side, allow it to remain upright for 6 hours before plugging in.
- Servicing: This product should only be serviced by an authorized technician using genuine spare parts. Unauthorized work may void the warranty and cause injury or malfunction.
- LED Light Replacement: If the interior LED light burns out, contact Unique's technical service department for instructions. The appliance's functionality is not affected if the light is not working.
Need help?
General
To Next Page
