Need help?Do you have a question about the Unitec MABASIC 200 and is the answer not in the manual?
Document is copyrighted; reprinting requires manufacturer approval.
Manufacturer not liable for damages from improper use or unauthorized repairs.
Packaging is recyclable; product disposal must follow EU regulations.
Explains the meaning of DANGER, WARNING, ATTENTION, and NOTE warnings.
Machine is for drilling metals; any other use is improper and dangerous.
Lists precautions like avoiding flammable environments, supervision, checking for damage, and workplace conditions.
Specifies that repairs must be done by qualified personnel or authorized workshops.
Details hazards of contact with live parts and how to avoid them.
Covers risks from improper handling, protective equipment, and operational safety.
Instructions to avoid property damage, including checking connections and handling cables.
Explains restart protection and the meaning of machine symbols.
Lists required PPE like protective clothing, goggles, ear protection, safety shoes, helmet, harness, and gloves.
Identifies key parts of the machine with numbers.
Identifies the ON/OFF switches for motor and magnet.
Lists all included accessories and parts.
Instructions to check for damage or missing items upon delivery.
Introduces essential preparation steps before any work.
Details safety for non-horizontal positions and working on scaffolding.
Explains factors affecting magnetic clamping force and substrate requirements.
How to prepare steel with low thickness for clamping.
Recommends special holding devices for non-ferrous metals or uneven surfaces.
Safety warnings and steps for inserting tools correctly.
Step-by-step guide for inserting core drills on specific models.
Step-by-step guide for inserting core drills on specific models.
Instructions for safely removing tools from the machine.
How to select the correct speed stage based on material and diameter.
Instructions for selecting the two gear stages on specific models.
Instructions for selecting the four gear stages on specific models.
How to turn the magnetic clamp on and off safely.
How to start and stop the machine using the switches.
Step-by-step guide for drilling with core drills, including notes on force and lubrication.
Safety warning about cut injuries and necessary precautions.
Procedures for clearing blockages caused by broken tools.
Procedures for clearing other types of blockages.
Safety precautions and steps for cleaning the machine.
Tasks to perform after each use, like removing tools and cleaning.
Warning about unqualified repairs and general maintenance advice.
Steps to adjust the machine slide guide for clearance.
Specifies that carbon brush replacement must be done by authorized personnel.
Information on how to contact customer service for assistance.
Guidelines for storing the machine when not in use.
Table listing common faults, possible causes, and remedies.
To Next Page
General