Unitech RP902 - Connecting to an APPLE Ios Device

28
© 2023 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA520 User’s Manual
RP902 User’s Manual
2.9 Connecting to an APPLE iOS Device
Note: You can only connect RP902 to an APPLE iOS Device through BLE HID
mode.
1. Getting Start → Enter the Setting page by short pressing the
Function/Select Up Key → Enter the Operating Mode → Select BLE HID
Mode, and RP902 will restart.
2. Go back to the Setting page → Information → MacAdress
3. Turn on the Bluetooth of your APPLE iOS Device → Search for the
Bluetooth device that matches RP902 Mac Address and connect.
The communication LED will show blue light when the pairing is success.
Note: For more information, please refer to TagAccess User’s Manual which
can be download on http://www.ute.com/en/products/detail/TagAccess.