Unitech WD200 User Manual

6
© 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
Android is a trademark of Google LLC.
WD200 User’s Manual
1.4 Getting Started
1.4.1 Charging the Battery
Connect the USB cable to the USB port on WD200 and connect the other end
to an AC power adapter. We recommend only the USB cable that comes with
the WD200, or a unitech designed cradle, to charge the WD200.
The LED indicator on WD200 is red when charging and is green when fully
charged.
+
CAUTION!
DO NOT force opening the battery cover and attempting to change the battery as you
may damage the product and the battery, it is built-in and is not user changeable.
Any batteries inappropriate use could result in damage or safety issues such as
catching fire, or malfunctioning the sensitive components.
unitech reserves the right and disclaims any liability as a result of any damages
caused by ignoring this warning.
To avoid any consequential damages, please contact a unitech representative before
removing the battery.

Unitech WD200 Specifications

General

Brand	Unitech
Model	WD200
Category	Touch terminals
Language	English