Need help?Do you have a question about the United Spa Controls T8-X Topside and is the answer not in the manual?
Specifies no end-user serviceable parts and requires professional service for United Spa Controls systems.
Stresses reading the guide to avoid voiding the warranty due to product misuse.
Advises adherence to basic safety precautions when operating electrical spa equipment.
Covers user safety regarding supervision, suction, medication, and infectious diseases.
Provides advice on spa entry/exit, drug/alcohol use, pregnancy, temperature, and exercise.
Includes warnings on immersion, electricals near water, chemistry, and hyperthermia risks.
Details required hole size and spacing for mounting the T8-S/T8-X topside on hot tubs.
Explains connecting the topside cable and affixing the unit to the spa shell securely.
Identifies and describes the buttons and display elements of the T8-S/T8-X topside unit.
Guides users through initial power-up and checking the software version of the topside.
Introduces the configuration menu, its five codes, and options for system setup.
Lists the five configuration codes and their available options for setting up the spa system.
Provides step-by-step instructions for entering the configuration menu and selecting options.
Explains changing codes, saving settings, and handling potential conflicting code selections.
Introduces the user settings menu for customizing features of the topside.
Details how to access and move through the user-configurable settings.
Explains configuring system time and filtration cycle durations/start times.
Covers temperature scale, time display, buzzer, and locking features.
Describes how temperature and settings menu locks function to prevent unauthorized changes.
Provides the procedure for unlocking the topside after a lock has been engaged.
Details adjusting spa water temperature, including range and display.
Explains Standard and Economy heating modes and their operation.
Provides instructions on switching between Economy and Standard heating modes.
Explains how to change the screen orientation for better readability.
Details operating Pump-1 on single and dual/triple pump systems.
Explains operating Pump-2 on single speed or dual speed systems.
Describes operation of Pump-3 or Air Blower on T8-X models.
Explains turning the spa light on/off and its color-changing feature.
Lists and explains status messages for pumps, air, and light activation.
Explains the 'FRZE' message and conditions for its appearance/disappearance.
Details messages for filtration cycles, heating, and locked states.
Explains error messages for flow, sensors, and overheat conditions.
Outlines the terms and duration of the limited warranty for spa control equipment.
Lists conditions and events not covered by the warranty.
Describes the process for submitting warranty claims and obtaining service.
States warranty disclaimers, liability limits, and legal rights.
General| Display Type | LCD |
|---|---|
| Number of Buttons | 8 |
| Backlight | Yes |
| Model | T8-X |
| Category | Control Panel |
| Manufacturer | United Spa Controls |
| Compatible Systems | United Spa Controls |
To Next Page
