UNITED T14P User Manual

OPERATOR MANUAL
FIRST EDITION
3/2017
Professional-Grade Trimmer
Maintenance
To avoid damaging the trimmer, never immerse it in water or other liquids.
Do not use abrasive cleaners on the trimmer.
Do not use the trimmer without the safety shield installed properly.
NOTE
1. Please use a dry cloth to wipe the surface of the trimmer. Do not pour water
directly onto the machine.
2. All moveable parts must be lubricated and oiled periodically. Before
lubricating, these parts should be cleaned from paper dust and oil deposits.
3. If the blade has become dull, please contact your dealer to replace or sharpen
it. The blade should only be replaced or sharpened by a trained professional.
4. Please regularly inspect the effectiveness of the blade friction mechanism.
If the blade is easily dropping down after being raised, remove the plastic cap
and use a wrench to tighten the screws on both sides. (See diagram below.)

UNITED T14P Specifications

General

Brand	UNITED
Model	T14P
Category	Trimmer
Voltage	220-240V
Blade Material	Stainless Steel

Summary

Maintenance

Basic Care and Lubrication

Wipe trimmer with dry cloth, periodically lubricate moving parts after cleaning.

Blade and Mechanism Maintenance

Contact dealer for blade issues, inspect blade friction mechanism for tightness.

Safety Precautions

Safety Guidelines

Read instructions, keep away from children, use for paper only, keep hands clear of blade, use safety shield.

Assembling the Safety Shield

Install Safety Shield

Align shield holes with clamp bar, attach with screws, ensuring secure fastening.

Operating the Trimmer

Prepare and Cut

Release blade lock, raise blade, insert paper, adjust guide, lower blade to cut.