HELLO, I’M YOUR NEW SOLUTIONi
INTUITIVE WELDING CONTROL
Welcome to the SOLUTIONi resistance welding control. The “i” in the name stands
for INTUITIVE. This direction book will walk you through steps to set up the control
for the first time. After that, you should be able to do most things on the control
without looking at a direction book.
The display will ask questions and then tell you what to do for the next step or
operation. It “thinks” like you do! It is INTUITIVE.
A unique button on the keypad can be used to reach all setup programs
without having to remember program locations.
FAULTS: When a fault condition occurs, the SOLUTIONi control will tell you what to
do next. You don’t need any codes or printed sheets to get you back into production!
Whenever you see pay extra attention to the idea shown.
This symbol will tell you that you should skip this section if the
directions do not apply to your model control.
NEED HELP? Contact the Unitrol technical support team Monday through Friday
between 9:00am and 5:00pm CT. As with all Unitrol products, we provide free
technical support for the life of your SOLUTIONi control. Please have your model
and serial numbers ready and, if possible make your call when you are
standing at the welder.
Email support: techsupport@unitrol-electronics.com
Phone support: 847-480-0115
FAX support: 847-480-0932
Unitrol Electronics, Inc.
702 Landwehr Road
Northbrook, Illinois 60062
www.unitrol-electronics.com
To Next Page
Loading...