EasyManua.ls Logo

Unitron Charger Combi BTE 2 - Preparing Your Charger; Charging Your Hearing Aids

Unitron Charger Combi BTE 2
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 5
3. Charging your hearing aids
Low power: You will hear two beeps when the
battery is low. You will have approximately 60
minutes before you have to charge the hearing
aids (this can vary, depending on the hearing aid
settings).
Before using your hearing aids for the rst time,
it is recommended to charge them for 3 hours.
The hearing aids must be dry before charging,
see chapter 6.
Please ensure to charge and use the hearing
aids within operating temperature range: +5° to
+40° Celsius (41° to 104° Fahrenheit).
a
b
d
c
2. Preparing your charger
Connecting the power supply
a) Plug the larger end of the charging cable into
the power supply.
b) Plug the smaller end into the micro-USB port on
the charger.
c) Plug the power supply into a power outlet.
d) The charger indicator light is green when the
charger is connected to the power supply.

Related product manuals