Operating Instructions
Push Button
Your hearing instrument is equipped with a push
button, built into the back of the battery door,
which has been set for switching between
programs or adjusting your volume. Note that your
push button may be disabled by your hearing
healthcare professional and, therefore, could be
inactive.
Program Control
If you have an active push button program control,
each time you push the button, you will move to a new
program. Also if duoLink is enabled, the hearing
instrument is set so that by pressing the push button
on one hearing instrument, both hearing instruments
will change programs.
Your hearing instruments beep to indicate which
9
Program 1 (e.g. Automatic Program) 1 beep
Program 2 (e.g. Group/Party Noise) 2 beeps
Program 3 (e.g. Easy-t/Telephone) 3 beeps
Program 4 (e.g. Music) 4 beeps
Easy-t/Telephone short melody
duoLink (if enabled) Opposite ear beeps the
same as side being adjusted
To Next Page
Loading...
