8 9
Hearing aids with custom molds
1. Hold the custom mold
between your thumb and
index nger. The opening
should be pointing in
towards your ear canal with
the hearing aid resting
above your ear.
2. Carefully insert the custom
mold into your ear. The
mold should t into your
ear snugly and comfortably.
3. Place the hearing aid over
the top of your ear.
1.
2.
3.
4. Removing the hearing aids from
your ears
1. Pull on the bend of the
wire and remove the
hearing aid from behind
the ear.
Labeling
The serial number and year of manufacture are
located inside the battery door.
1.
To Next Page
Loading...
