Operating Instructions
Push Button
Your hearing instrument is equipped with a push
button, built into the back of the battery door,
which has been set for switching between
programs or adjusting your volume. Note that your
push button may be disabled by your hearing
healthcare professional and, therefore, could be
inactive.
Program Button
If you have an active push button program control,
each time you push the button, you will move to a new
program.
Your hearing instruments beep to indicate which
program you are in (i.e. one beep for program 1, two
beeps for program 2, etc.)
Volume Control
If your push button has been configured as a volume
control, you can adjust the volume level by pushing
the button.
9
Program 1 (e.g. Automatic Program) 1 beep
Program 2 (e.g. Group/Party Noise) 2 beeps
Program 3 (e.g. Easy-t/Telephone) 3 beeps
Program 4 (e.g. Music) 4 beeps
To Next Page
Loading...
Need help?
General
