12
Note: The pairing procedure is controlled by your
cellular phone. Different cellular phones have
different menu structures. You should therefore
refer to your cellular phone user guide or dealer
support if you cannot complete the pairing
procedure with the generic steps described here.
How to Connect to a Cellular Phone
Once your cellular phone and uDirect are paired (see
Pairing a Bluetooth-enabled Cellular Phone), the
cellular phone needs to be ‘connected’ to your uDirect
before it will actually send audio signals to it.
This function should also appear in your cellular
phone’s “Bluetooth” menu.
1. Ensure the uDirect is turned ON.
2. Locate the Bluetooth section in your phone menu
and select List of “Paired devices”.
3. Locate and Highlight your uDirect and select
“Connect”.
4. Confirmation of successful connection is indicated
on uDirect by the Bluetooth indicator slowly
flashing blue, and a headset symbol may appear
on the main screen of your cellular phone. Note:
some cellular phones may perform the connection
procedure automatically after pairing. Select “Yes”
when prompted to allow this device to connect
automatically once the pair is completed.
To Next Page
Loading...
