Unitron uDirect Guide

24
adapter, you can stream audio wirelessly via
Bluetooth. In order to use your uDirect with a
Bluetooth enabled audio device or transmitter, you
must first pair the devices. Please refer to the section
“Pairing uDirect with a Bluetooth transmitter” for
further details.
Connecting via FM system
When noise, distance or reverberation is a problem,
FM systems greatly improve communication. A
wireless FM communication system consists of a
transmitter and a receiver. The transmitter is placed
near, or directly connected to the sound source (e.g.
TV or radio).
It transmits the signal via radio to your FM receiver
(MLxi or MicroMLxS) attached to your uDirect. The FM
signal is then sent to your hearing instruments via the
uDirect.
• Attach your FM receiver to uDirect via the FM input
(Europlug) as shown in the picture below.
• Place the FM transmitter near the sound source or
connect it to your TV, radio etc. and turn it ON.
• Turn the FM receiver ON. If you use a MicroMLxS,
receiver, set the switch to the position "•".
The FM transmitter transmits the signal via radio to
your FM receiver attached to uDirect. The FM signal is

Unitron uDirect Specifications

General

Brand	Unitron
Model	uDirect
Category	Accessories
Language	English