UNITY LAUNDRY SYSTEMS UTS29 - Page 26

26
Part. 14000002 Rev. 06//2021
®/™ ©2022 Unity Laundry Systems. All rights reserved.
Esc Enter
The following are the default passwords to access the controller interface menu items.
Thedefaultfactorypasswordisforcertiedtechnicianstochangemachineparameters.
The default user password is for owner/attendents to view parameters.
The default maintenance password is for owner to change machine ID or change/check cycle history.
The following are the default password codes to access the controller interface menu items.
Default factory password: ↑ ↓ ↑ ↓ ↓ ↑ ↓ ↑ (hot warm hot warm warm hot warm hot)
Default user password: ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ (warm warm warm warm warm warm warm warm)
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (hot hot hot hot hot hot hot hot)
VENDED CONTROLLER OVERVIEW