Evermore Controls
The following controls are available on Evermore.
Mod
Adjusts the amount of modulation applied to the reverb tail. The depth of modulation increases
as the knob is rotated clockwise, from subtle chorusing to a heavy warble.
Mix
Adjusts the amount of reverb signal mixed with the clean signal. When the mix control is fully
clockwise, the reverb is 100% wet.
Reverb Type
Use this switch to select the Reverb type: Room, Small Hall, or Large Hall.
Type Details
Room Moderate to high initial density, low to moderate coloration.
To Next Page
Loading...
