Note: You can select other mic models in the UAFX Control app.
Mic Description
Dynamic The dynamic "57" has been the industry standard in the US for recording loud
guitar amps since the late '60s. Our model is based on a vintage unit from the
'70s. With a natural bass roll off and accentuated upper midrange, this mic
always cuts through any mix with practically no need for console EQ.
Condenser The condenser "67" can be heard on the biggest pop and rock records of the
'60s, '70s, and '80s. This tube condenser mic has a wide frequency range
without sounding harsh or bottom heavy. It has a gentle upper midrange that's
great for distorted rhythm guitars.
Ribbon The ribbon "121" is a modern classic for electric guitar. With its silky high end and
extended bass frequency range, many engineers pair the "121" with the "57" to
even out the sound.
Footswitches
The footswitches toggle one or more Rigs on/off. Only one Rig can be active at a time. Each
footswitch can have one or two Rigs assigned to it, depending on the footswitch mode set in
the UAFX Control app. By default, OX Stomp is set up in A | B mode, where the left footswitch
toggles Rig A on/off, and the right footswitch toggles Rig B on/off.
To switch to a different Rig while a footswitch is active, choose a Rig with the Rig knob, or with
the UAFX Control app.
Footswitches can be configured to toggle two or four Rigs on/off with various effect
combinations, or to toggle Reverb and Delay on/off with UAFX Control. See Using OX Stomp
with UAFX Control for more information.
Note: When OX Stomp is in Delay | Reverb footswitch mode, there are no Rigs assigned to the
footswitches. In this case, choose a Rig with the Rig knob or the UAFX Control app.
To Next Page
Loading...
