SIMPLE SET
DIGIT TV
Atvio, GHIA
Daewoo, Sansui
Hisense
JVC
LG
Philips
Samsung, Panasonic
Sharp
Sony, Westinghouse
TCL
This is a quick setup method for
popular TV brands.
1. Make sure your TV is on.
2. Find your TV brand in the Simple Set
table. Note the number that
corresponds to your device brand.
SETUP
As well as controlling your Android TV
box, your remote control can also be set
up to control the Power, Volume, Mute
and Input functions of your TV.
There is a easy way to do this; SimpleSet
for the most popular brands of TVs.
1
PAIRING
SEQUENCE
In order to enable your remote control to
support full set of features like voice control this
needs to be paired with your STB. Out of the box
experience
•
Follow the onboarding instructions
shown on screen during the setup
process.
Manual Pairing
1.
Press and hold Home + Back
until the LED fl ash twice.
2.
LED will fl ash continuously until
paring sequence becomes completed.
Note: this sequence will trigger a paring event on
your remote and STB, please make sure your
remote control is close and in line of sight to your
STB.
3. Press and hold
OK
+ STB Power until
the feedback LED
blinks twice.
4. Press the TV POWER key, the feedback LED stays
lit.
5. While pointing the remote at the TV, press and
hold the number key for your brand. Release the
key as soon as the device turns OFF.
6.
7.
Press the POWER
KEY on the remote
control to turn your
TV back ON.
The remote should now work for TV Power,
Volume, Mute and Input. If they don’t all work,
try again from step 3.
FEATURES
SETUP
To Previous Page
Loading...
Need help?
General
