Need help?Do you have a question about the Universal Electronics ATLAS CABLE 4-DEVICE and is the answer not in the manual?
General| Brand | Universal Electronics |
|---|---|
| Model | ATLAS CABLE 4-DEVICE |
| Category | Remote Control |
| Language | English |
Remote is preprogrammed for specific brands; this step can be skipped if default brands are used.
Follow steps to program the remote for devices other than the default brands.
Procedure to unlock Cable ID Lock before changing the converter code.
Aim remote at device and press POWER to turn it off; repeat if necessary.
Write down each working device code for future reference in the provided boxes.
Turn on combo, press VCR, hold SETUP, enter code, press POWER.
Program a separate TV code if needed to access volume control.
Aim remote at TV/VCR Combo and press POWER to confirm it turns off.
Turn on TV, press TV, hold SETUP, enter 9-9-1, then alternate POWER and TV.
Press SETUP to lock in the code once the target device turns off.
Repeat search steps for AUD, VCR, or CBL devices.
Check batteries, aim remote correctly, and ensure device compatibility.
Verify codes, use ENTER if needed, and check original remote functions.
Address TV/VCR combos, RCA TVs, and failed search attempts.
Program specific codes; clear device keys for search issues.
To Next Page
