NOTE: If the selected mode key emits a long blink, the
code is invalid. Repeat steps 2 and 3 and try entering
the same code again.
4. Aim the remote control at the device and press
POWER once.The device should turn off. If it
does not,repeat steps 2 to 3, trying each code
for your brand until you find one that works.
If it still does not work, try searching for the
code (see Searching For Your Code on page 11).
NOTE: If the device does not have a POWER key, press
the (Play) key.
5. Repeat steps 1 through 4 for each device you
want the the remote control to control. For
future reference, write down each working
device code in the following boxes:
AUD
Audio Device ____________________
VCR
TV
CBL
9
To Next Page
Loading...
