Need help?Do you have a question about the Universal Laser Systems VLS6.60 and is the answer not in the manual?
General| Laser Type | CO2 |
|---|---|
| Connectivity | USB, Ethernet |
| Cooling | Air-cooled |
| Work Area | 32" x 18" (812mm x 457mm) |
| Positioning Speed | 100 ips (2540 mm/s) |
| Resolution | Up to 1200 dpi |
| Maximum Part Size | 32" x 18" (812mm x 457mm) |
| Operating System Compatibility | Windows |
| Software | Universal Control Panel |
| Supported File Formats | AI, BMP, DXF, GIF, JPG, PDF, PLT, PNG, TIF |
Provides a comparative overview of specifications for VLS3.60, VLS4.60, and VLS6.60 models.
Guides users on operating the laser system through various controls and software.
Describes the UCP interface for interacting with and controlling the laser system.
Details how to configure laser system features via the System Tab.
Comprehensive guide for installing and setting up the VersaLASER system.
Details on installing the ULS software and required computer specifications.
Procedure for correctly installing the laser cartridge.
Steps to ensure the laser system is properly leveled for optimal performance.
A guide to performing the first engraving job on the laser system.
To Next Page
